Method 1 — Using your model (recommended)

Attach the included bricks to the correct connection points underneath your model. Align the connector with the bricks and press the connector firmly onto them. This allows the model to correctly align the bricks for you.

Method 2 — Using another LEGO® brick

Place the included brick into the connector, then attach another LEGO® brick on top. Use the second brick to help align the included brick and press it firmly into the connector.

Method 3 — By hand

The bricks can also be inserted directly using your fingers. Make sure the brick is correctly aligned before pressing it firmly into place.

How do I use the Connectable Base System?

1. Push up the base insert
   Using your fingers, a pen, or another suitable tool, gently push the curved base insert upwards to create a small gap.
2. Insert the base connector
   Line up one end of the base connector with the gap underneath the raised insert.
3. Push the stand down
   Once aligned, press the stand firmly back down. This locks the connector between the base and insert.
4. Connect the second stand
   Repeat the same process with the other end of the connector on your second stand.

Your stands should now be securely connected. Repeat the process to expand your display with additional stands.

I’m having trouble inserting the LEGO® brick into my Universal Stand connector. What should I do?

If you are having difficulty inserting the LEGO® brick into the connector, first check that the brick is correctly aligned with the opening before applying pressure.

For easier installation, attach another LEGO® brick to the top of the brick you are inserting. This gives you a larger surface to hold, making it easier to keep the brick aligned while pressing it firmly into place.

Avoid forcing the brick into the connector at an angle. If you are still unable to insert the brick, please contact us and we’ll be happy to help.